Singer 319 Class Sewing Machine Service Manual

 

 

 

Singer 319 Class Sewing Machine Service Manual.

Includes:
Description, Machine 319w2.
Differences in Bobbin Case Holders and Bobbin Cases of Machines 306 and 319.
Remove the Arm Shaft Connection Belt from within the Arm.
Replace the Arm Shaft Connection Belt.
Set the Feed Dog at the Correct Height.
Remove the Binding in the Feed Connection Assembly.
Remove and replace the Hook Driving Shaft.
Adjustment for Thread Clearance Between Position Finger and Bobbin Case Base.
Set the Needle Bar Height Indicator.
Install Bight Control Mechanism.
Remove the Disc Selectors from the Follower Frame.
Replace the Disc Selectors on the Follower Frame.
Check Disk Follower Frame Adjustment.
Remove the Stack of Fashion Discs from the Machine.
Substitute a New Fashion Disc.
Assemble the Stack of Fashion Discs.
Replace the Stack of Fashion Discs in the Machine.
Parts Chart, Wiring Harness.
When the Disc Follower Frame seems to be Noisy.
“Thumping” Noise.
Oiling the Machine.
Greasing the Gears.
Danger of Over Lubrication.

22 page service and adjusters manual.

PDF download

Singer Model 319

Please Note*
This is a Service Manual. If you need the instruction – user manual, you can find one in our shop here.

 

Automatic Swing-Needle

Singer sewing machine Service Repair Manual.

 

manualsoncd.com

sewingpartsplus.com   

 

Singer Class 319 Sewing Machine Service Manual

 

How To Thread A New Home Janome 581 Sewing Machine

 

 

 

 

How To Thread A New Home Janome 581 Sewing Machine

 

Learn how to thread your New Home Janome sewing machine in this easy step-by-step tutorial.

 

Threading the Machine

Raise the thread take-up lever to its highest point by turning the balance wheel toward you. Then raise
the presser bar lifter and lead the thread through all points from 1 to 9 as follows:

1. Place a spool of thread on the spool pin.
2. Pass the thread through top cover thread guides ( 1 & 2).
3. Lead thread between tension discs (3) from right to left while restraining thread from
drawing out freely from the spool. Then pull it up through the check spring (4) and over the tension
thread guard(5) from behind.
4. Guide thread into the hole on the thread take-up lever(6), then down into face plate thread
guides (7) and needle bar thread guide (8).
5. Thread the needle (9) from left to right and draw about 15 cm or 6 inches of thread
through the eye of the needle.

 

NOTE: You may want to cut the end of thread with
sharp scissors for easier needle threading.

 

You can also find additional Janome – New Home user and owner manuals available in our shop.

Please feel free to contact us if you have any questions about this manual.

 

You can view these manuals on your device or download the manual to save or print as well.

PDF download

 

You can get the complete instruction manual here.
Includes: Adjusting tensions, bobbin winding, changing needles, remove and replace bobbin case, zigzag, programming stitches, and much more.

 

How To Thread A New Home Janome 581 Sewing Machine

Elna 704 DEX Sewing Machine Instruction Manual

 

 

 

Elna 704 DEX Sewing Machine Instruction Manual.

Includes:
Threading machine.
Machine setup.
Upper looper and chain looper.
Adjusting thread tension.
Program selection.
Stitch length.
Setting the cutting width.
Foot pressure.
Basic sewing techniques.
Chainstitch.
Cover hem.
Overlocking inside corners.
Quilting.
Oiling and cleaning the machine.
Replacing the moving blade.
Much more!

60 page instruction – owners manual.

Model: Elna pro 704 DEX

Serger – Overlock

Pdf download

 

Please Note*
This manual contains
English, French, German languages.

 

You can view this manual on your device or download and print it as well.

 

Feel free to use our contact form if you have any questions about this manual.

 

Elna 704 DEX Sewing Machine Instruction Manual.

You will find more Elna sewing machine user manuals available here in our shop.